Spoon sampler for turbidity
This spoon sampler is used for sampling sludge at the free pipe, channel or sump outlet.
The turbidity sampler is used to take turbidity samples from vertical channels or pipes across the entire chute cross-section.
Advantages
- Single sampling over the entire cross-section
- Easy to integrate into systems via flanges
- Inlet plates of the sample chute screwed together and therefore replaceable
- Housing can be fitted with wear protection rubber coating / wear plates
- Sample chute is parked outside the product flow
Operating behavior & mechanical features
With the turbidity sampler, representative sampling is carried out by a sample chute that is guided through the material flow in a circular motion at a constant speed. While the sample chute rotates through the material flow, a partial flow is continuously separated and led to the outside. The sample material obtained in this way can be collected via a pipe socket and processed further. The waiting position of the sample chute between two samplings is inside the material chamber, but outside the main product flow, so that constant contact between the sample chute and the material flow is excluded, also with regard to wear.
The sample chute can be driven either by a geared motor or a pneumatic cylinder.
In contrast to the Downpipe / slurry sampler Type FPN / TPN for dry or wet bulk solids, the sample chute can be made flatter for turbid or suspensions, which reduces the installation height and thus offers more scope for installation.
Gallery
TPN turbidity sampler for ore concentrate
Downpipe sampler / turbidity sampler Principle sketch 3D
Échantillonneur pivotant pour tuyau de descente
Prélèvement d'échantillons de matériaux en vrac sur toute la section transversale de la goulotte, même lorsque la hauteur d'installation est réduite.
Echantillonneur sur tuyau de descente et de boues
Prélèvement d'échantillons de matières en vrac et boues sur toute la section transversale des goulottes ou tuyaux verticaux.
Comment pouvons-nous vous aider ?
Nous avons la solution adaptée à chaque tâche. Et si ce n’est pas le cas, nous travaillerons avec vous pour en trouver une. N’hésitez pas à nous contacter !
Nos spécialistes se feront un plaisir de vous conseiller individuellement sur site ou à distance et sont à votre disposition pour répondre à toutes vos questions. Envoyez-nous un message via notre
Opérations unitaires
Industries
Utile
© 2026 - SIEBTECHNIK GmbH