Comportement en service et caractéristiques mécaniques
CENTRIFLEX
The CENTRIFLEX is characterized by an extremely robust mechanical design and a fully electronic control system. Practically any type of centrifugal separator can be easily tested or simulated with small quantities of material. Essential operating parameters – g-force, dwell time, cake thickness – can be exactly reproduced in the test.
The CENTRIFLEX is accelerated to nominal speed in the shortest possible time and braked to a standstill under electrical control. Either a soft stop or a quick stop is possible. Precise centrifuging times can be achieved with the automatic quick-stop function. The centrifuge is controlled via a clear touch screen control panel with digital display of speed, spin time and operating status. Automatic or manual operation with time measurement can be selected.
The CENTRIFLEX is designed as a free-standing unit for user-friendly loading and filling. The storage recess at the front of the housing provides a protected storage area for collecting containers for centrate or filtrate disposal.
The centrifuge is of course equipped with an electric lid lock, so that access to the rotating parts is only possible when the machine is at a standstill.
The menu item Equipment variants describes the many possible applications of the CENTRIFLEX in the laboratory and pilot plant for the production of smaller product quantities.
CENTRILAB
The CENTRILAB has a very robust mechanical design and a fully electronic control system. Acceleration and dwell times can be preselected to the nearest tenth of a second via a touchscreen. To avoid product turbulence during the tests, the CENTRILAB is equipped with a specially developed soft start/stop function.
The CENTRILAB is designed as a portable table-top device. The centrifuge is of course equipped with an electric lid lock so that access to the rotating parts is only possible when the centrifuge is at a standstill.
